Ceiling Extractor Fan Light For Bathroom - Do you know what? The name of this informative article is merely out-and-out misleading. The only real "disadvantage" as it pertains to a ceiling fan is what it takes to get one properly installed. Ceiling fans could be hard to install for the inexperienced do-it-yourselfer. Sometimes, where the ceiling fan is to be set up you'll need to run an electrical line to the location. Unless you're adept at doing this sort of thing, hiring an authorized, bonded and capable electrician will probably save you a lot of grief in the future.
There is also the minor "disadvantage" that involves the problem of regular maintenance. Correctly installed, a ceiling fan will provide many, many years of nice cooling and cost-savings in your heat bill (assuming there is a fan that enables one to reverse the blade direction). Granted, you have to wipe down the blades once in a while but everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans get out of equilibrium and need minor alterations. The most frequent culprits are loose screws that attach the blades to the motor casing, blades that aren't at exactly the same angle (pitch) as the rest of the blades and also a blade or blades that weigh slightly more compared to the others. Be sure that all the screws are tight, without going into great detail. Whenever they're not tightening the ones that have come loose and run the fan. Your issue has been solved, in the event the wobbling has stopped.
Otherwise, utilize a yardstick or other straight piece of wood and place it (with the fan quit) vertically at the outer edge of one of the blades. Rotate the blades by hand to make sure that each blade touches the stick. Turn the fan on again and see if you have solved the difficulty.