Hunter Classic Ceiling Fan White - Do you know what? The name of the article is simply out and out misleading. The only actual "disadvantage" when it comes to a ceiling fan is what it will take to get one correctly installed. Ceiling fans could be hard to install for the inexperienced do it yourselfer. In some cases, where the ceiling fan will be set up you'll need to run an electrical line to the location. Hiring a capable, bonded and licensed electrician will more than likely save you a lot of grief in the long run, unless you are skillful at doing this kind of thing.
There is also the minor "disadvantage" that involves the problem of regular care. Correctly installed, a ceiling fan will give you years and years of enjoyable cooling and cost-savings on your own heat bill (assuming you've got a fan which allows one to reverse the blade direction). Allowed, you need to wipe down the blades in a while but everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans get out of equilibrium and require slight alterations. The most common culprits are loose screws that attach the blades to the motor housing, blades that are not at precisely the same angle (pitch) as the remaining blades as well as a blade or blades that weigh slightly more in relation to the others. Without going into great detail, make sure that every one of the screws are tight. Whenever they aren't tightening the ones that have come loose and run the fan. If the wobbling has stopped, your problem has been solved.
Otherwise, make use of a yardstick or other straight bit of wood and place it (with the fan quit) vertically in the outer edge of one of the blades. Rotate the blades by hand to make sure that the stick touches. If one or more do not, just (and gradually) bend the blade(s) so that their pitch matches the others and repeat the procedure until you are satisfied that each blade has the same pitch.