Flush Mount Ceiling Fan With Light For Kitchen - Guess what? The title of this article is only out and out misleading. The only actual "con" as it pertains to a ceiling fan is what it requires to get one properly installed. Ceiling fans may be hard to install for the inexperienced do it yourselfer. Sometimes, where the ceiling fan will be to be installed, you will need to run an electrical line to the region. Hiring a capable, bonded and licensed electrician will most likely save you a lot of grief in the long term, unless you are skillful at achieving this type of thing.
There's also the minor "con" that involves the problem of periodic care. Properly installed, a ceiling fan will provide years and years of agreeable cooling and cost-savings in your heating bill (assuming there is a fan that enables one to reverse the blade direction). Allowed, you should wipe the blades down in a while but then, everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need slight alterations and get out of balance. The most often encountered culprits are loose screws that attach the blades to the motor casing, blades which aren't at exactly the same angle (pitch) as the remaining blades as well as a blade or blades that weigh somewhat more than the others. Ensure that all the screws are tight without going into great detail. Whenever they truly aren't tightening the ones that run the fan and have come loose. Your issue was solved when the wobbling has quit.
If not, use a yardstick or another straight piece of wood and place it (with the fan quit) vertically at the outer edge of among the blades. Rotate the blades by hand to make sure that each blade touches the stick. If one or more don't, merely (and gradually) bend the blade(s) so that their pitch matches the others and repeat the procedure until you are satisfied that each blade has the same pitch.