Hunter Ceiling Fan With Light And Remote Control

320 views

Hunter Ceiling Fan With Light And Remote Control


Hunter Ceiling Fan With Light And Remote Control - Do you know what? The title of this informative article is only out-and-out misleading. The only real "con" as it pertains to your ceiling fan is what it takes to get one properly installed. Ceiling fans might be hard to install for the inexperienced do-it-yourselfer. In some instances, you will need to run an electric line to the area where the ceiling fan would be to be installed. Hiring a qualified, bonded and licensed electrician will most likely save you much grief in the long term, unless you are adept at doing this kind of thing.

There is also the minor "disadvantage" that involves the problem of periodic care. Correctly installed, a ceiling fan will provide years and years of pleasant cooling and cost-savings in your heat bill (assuming there is a fan that enables one to reverse the blade direction).


On occasion, ceiling fans require small alterations and get out of balance. The most often encountered culprits are loose screws that attach the blades to the motor housing, blades which aren't at precisely the same angle (pitch) as the remaining blades and also a blade or blades that weigh slightly more in relation to the others. Without going into great detail, be sure that every one of the screws are tight. If they aren't tightening the ones that run the fan and have come loose. When the wobbling has quit, your issue has been solved.

If not, utilize a yardstick or another straight bit of wood and place it (with the fan stopped) vertically at the outer edge of among the blades. Rotate the blades by hand to be certain that every blade touches the stick. Turn the fan on again and see in the event you have solved the issue.