Acero Ceiling Fan Oil Rubbed Bronze - Guess what? The name of the article is just out-and-out misleading. The only real "disadvantage" in regards to your ceiling fan is what it takes to get one properly installed. Ceiling fans can be difficult to install for the inexperienced do it yourselfer. In some cases, you will need to run an electrical line to the region where the ceiling fan would be to be set up. Unless you're adept at doing this sort of thing, hiring a licensed, bonded and capable electrician will probably save you much grief in the long term.
There's also the minor "con" that involves the issue of periodic care. Properly installed, a ceiling fan provides years and years of enjoyable cooling and cost-savings on your own heat bill (assuming you've got a fan which allows one to reverse the blade direction). Allowed, you should wipe the blades down once in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans require minor alterations and get out of equilibrium. Without going into great detail, make certain that all of the screws are tight. Whenever they're not tightening the ones that run the fan and have come loose. If the wobbling has ceased, your issue was solved.
If not, utilize a yardstick or other straight part of wood and put it (together with the fan quit) vertically at the outer edge of among the blades. Rotate the blades by hand to ensure that the stick touches. If one or more do not, merely (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you're satisfied that each blade has the same pitch. Turn the fan on again and see if you've solved the difficulty.