Modern Ceiling Fan With Uplight - Guess what? The title of this article is only out-and-out misleading. The only real "con" as it pertains to your ceiling fan is what it requires to get one correctly installed. Ceiling fans can be hard to install for the inexperienced do-it-yourselfer. In some cases, where the ceiling fan would be to be set up you'll need to run an electrical line to the area. Hiring a qualified, bonded and licensed electrician will probably save you a lot of grief in the long run unless you're skillful at achieving this sort of thing.
There is also the minor "minus" that entails the issue of periodic care. Properly installed, a ceiling fan will provide years and years of pleasant cooling and cost-savings on your own heating bill (assuming you've got a fan that allows one to reverse the blade direction). Allowed, you should wipe the blades down once in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans need minor alterations and get out of equilibrium. The most frequent offenders are loose screws that attach the blades to the motor casing, blades that are not at precisely the same angle (pitch) as the remaining blades and a blade or blades that weigh somewhat more compared to the others. Be certain that all of the screws are tight without going into great detail. When they truly aren't tightening the ones that have come loose and run the fan. Your issue has been solved, if the wobbling has stopped.
If not, utilize a yardstick or another straight bit of wood and place it (with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to be certain that each blade touches the stick.