Low Profile Ceiling Fans No Lights - Guess what? The title of this informative article is just out and out misleading. The only real "disadvantage" when it comes to your ceiling fan is what it will take to get one properly installed. Ceiling fans could be hard to install for the inexperienced do it yourselfer. Sometimes, where the ceiling fan is to be set up you'll need to run an electric line to the area. Unless you are adept at achieving this sort of thing, hiring a licensed, bonded and capable electrician will more than likely save you a lot of grief in the long term.
There's also the minor "minus" that involves the problem of regular care. Properly installed, a ceiling fan will give you years and years of agreeable cooling and cost-savings on your heating bill (assuming there is a fan that enables one to reverse the blade direction).
On occasion, ceiling fans get out of balance and need slight alterations. The most common culprits are loose screws that attach the blades to the motor casing, blades that are not at the same angle (pitch) as the remaining blades as well as a blade or blades that weigh slightly more in relation to the others. Make certain that every one of the screws are tight without going into great detail. Whenever they truly aren't tightening the ones that have come loose and run the fan. Your problem has been solved, when the wobbling has stopped.
Otherwise, make use of a yardstick or another straight part of wood and put it (together with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to ensure that the stick is touched by every blade. If one or more don't, only (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you are satisfied that each blade has the same pitch. Turn the fan on again and see in the event you've solved the issue.