Palm Leaf Blade Ceiling Fans - Guess what? The name of this informative article is only out and out misleading. The sole real "con" in regards to some ceiling fan is what it takes to get one properly installed. Ceiling fans might be difficult to install for the inexperienced do it yourselfer. In some instances, you will need to run an electrical line to the area where the ceiling fan will be to be installed. Hiring a capable, bonded and licensed electrician will probably save you a lot of grief in the long run unless you are adept at doing this kind of thing.
There's also the minor "minus" that entails the problem of periodic maintenance. Correctly installed, a ceiling fan will give you many, many years of agreeable cooling and cost-savings on your heating bill (assuming you've got a fan that enables you to reverse the blade direction). Allowed, you should wipe down the blades in a while but everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans require slight alterations and get out of equilibrium. The most often encountered offenders are loose screws that attach the blades to the motor casing, blades which are not at precisely the same angle (pitch) as the rest of the blades and a blade or blades that weigh slightly more compared to the others. Be certain that every one of the screws are tight, without going into great detail. When they're not tightening the ones that run the fan and have come loose. Your issue has been solved in the event the wobbling has quit.
Otherwise, utilize a yardstick or another straight bit of wood and put it (together with the fan stopped) vertically at the outer edge of one of the blades. Rotate the blades by hand to make sure that the stick is touched by each blade.