Hunter Ceiling Fan Screws - You know what? The name of the article is only out and out misleading. The sole real "con" in regards to a ceiling fan is what it will take to get one correctly installed. Ceiling fans may be difficult to install for the inexperienced do-it-yourselfer. Sometimes, where the ceiling fan will be to be installed you'll need to run an electric line to the region. Unless you're skillful at achieving this kind of thing, hiring a capable, bonded and licensed electrician will more than likely save you a lot of grief in the long term.
There's also the minor "minus" that involves the issue of regular maintenance. Correctly installed, a ceiling fan will provide years and years of agreeable cooling and cost-savings on your own heat bill (assuming you have a fan that allows you to reverse the blade direction). Allowed, you need to wipe down the blades in a while but then, everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need slight alterations and get out of balance. Be certain that every one of the screws are tight without going into great detail. Whenever they aren't tightening the ones that run the fan and have come loose. When the wobbling has ceased, your issue has been solved.
If not, utilize a yardstick or another straight bit of wood and place it (with the fan stopped) vertically in the outer edge of one of the blades. Rotate the blades by hand to be certain that the stick is touched by every blade. If one or more do not, simply (and gently) bend the blade(s) so that their pitch matches the others and repeat the procedure until you're satisfied that each blade has the same pitch.