Heated Ceiling Fan Reiker - Do you know what? The name of the article is just out and out misleading. The sole actual "con" in regards to some ceiling fan is what it takes to get one properly installed. Ceiling fans could be difficult to install for the inexperienced do it yourselfer. Sometimes, you will need to run an electric line to the place where the ceiling fan will be to be set up. Unless you're skillful at achieving this type of thing, hiring a capable, bonded and licensed electrician will more than likely save you a lot of grief in the long run.
There's also the minor "minus" that entails the issue of periodic care. Properly installed, a ceiling fan will give you many, many years of nice cooling and cost-savings on your heat bill (assuming you've got a fan that enables you to reverse the blade direction).
On occasion, ceiling fans get out of balance and need slight adjustments. The most typical culprits are loose screws that attach the blades to the motor housing, blades which are not at precisely the same angle (pitch) as the rest of the blades as well as a blade or blades that weigh slightly more in relation to the others. Without going into great detail, ensure that all the screws are tight. Whenever they aren't tightening the ones that run the fan and have come loose. If the wobbling has stopped, your problem continues to be solved.
Otherwise, make use of a yardstick or other straight part of wood and put it (together with the fan stopped) vertically at the outer edge of among the blades. Rotate the blades by hand to make sure that the stick touches.