Springfield Ii Ceiling Fan Black - Do you know what? The name of the informative article is simply out-and-out misleading. The only real "con" as it pertains to some ceiling fan is what it requires to get one correctly installed. Ceiling fans can be hard to install for the inexperienced do it yourselfer. In some cases, you'll need to run an electrical line to the location where the ceiling fan is to be installed. Hiring a competent, bonded and licensed electrician will probably save you a lot of grief in the long term unless you are adept at achieving this kind of thing.
There is also the minor "minus" that involves the problem of periodic care. Correctly installed, a ceiling fan will provide years and years of enjoyable cooling and cost-savings on your own heat bill (assuming you've got a fan that enables one to reverse the blade direction). Allowed, you need to wipe down the blades in a while but then, everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need small adjustments and get out of equilibrium. The most typical culprits are loose screws that attach the blades to the motor casing, blades which aren't at exactly the same angle (pitch) as the rest of the blades as well as a blade or blades that weigh slightly more compared to the others. Ensure that all of the screws are tight without going into great detail. When they aren't tightening the ones that have come loose and run the fan. Your problem continues to be solved, when the wobbling has quit.
If not, use a yardstick or another straight bit of wood and place it (with the fan stopped) vertically in the outer edge of one of the blades. Rotate the blades by hand to make sure that the stick is touched by every blade. Turn the fan on again and see if you've solved the issue.