Types Of Ceiling Fan Regulators - Do you know what? The name of the article is only out-and-out misleading. The only real "minus" when it comes to some ceiling fan is what it requires to get one correctly installed. Ceiling fans can be hard to install for the inexperienced do it yourselfer. In some cases, where the ceiling fan is to be installed, you will need to run an electrical line to the location. Unless you are skillful at doing this kind of thing, hiring an authorized, bonded and competent electrician will more than likely save you a lot of grief in the long term.
There's also the minor "con" that involves the problem of periodic care. Properly installed, a ceiling fan provides years and years of enjoyable cooling and cost-savings in your heat bill (assuming you have a fan that allows one to reverse the blade direction). Granted, you need to wipe down the blades once in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans need minor alterations and get out of equilibrium. The most common offenders are loose screws that attach the blades to the motor casing, blades that are not at precisely the same angle (pitch) as the remaining blades as well as a blade or blades that weigh slightly more than the others. Without going into great detail, make certain that all of the screws are tight. If they're not tightening the ones that run the fan and have come loose. Your issue continues to be solved in the event the wobbling has stopped.
Otherwise, use a yardstick or another straight part of wood and place it (together with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to be certain that every blade touches the stick.