Ceiling Fans That Push The Most Air - Do you know what? The title of this article is merely out-and-out misleading. The sole actual "disadvantage" when it comes to some ceiling fan is what it will take to get one correctly installed. Ceiling fans could be hard to install for the inexperienced do it yourselfer. In some instances, where the ceiling fan will be to be installed, you'll need to run an electric line to the region. Hiring a capable, bonded and licensed electrician will more than likely save you a lot of grief in the future unless you are skillful at doing this sort of thing.
There is also the minor "disadvantage" that involves the issue of regular maintenance. Properly installed, a ceiling fan will give you years and years of agreeable cooling and cost-savings in your heat bill (assuming you've got a fan which allows one to reverse the blade direction).
On occasion, ceiling fans require slight alterations and get out of balance. The most typical offenders are loose screws that attach the blades to the motor housing, blades that are not at exactly the same angle (pitch) as the remaining blades as well as a blade or blades that weigh slightly more than the others. Without going into great detail, ensure that all of the screws are tight. Whenever they aren't tightening the ones that have come loose and run the fan. Your problem has been solved when the wobbling has stopped.
Otherwise, use a yardstick or other straight part of wood and put it (together with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to make sure that every blade touches the stick. Turn the fan on again and see in the event you have solved the issue.