Fanimation Palisade Ceiling Fan - You know what? The name of this informative article is merely out and out misleading. The only real "minus" in regards to your ceiling fan is what it takes to get one properly installed. Ceiling fans could be hard to install for the inexperienced do-it-yourselfer. Sometimes, where the ceiling fan will be to be installed you'll need to run an electric line to the place. Unless you are skillful at achieving this type of thing, hiring a licensed, bonded and competent electrician will more than likely save you much grief in the future.
There's also the minor "con" that entails the problem of periodic maintenance. Properly installed, a ceiling fan will give you many, many years of enjoyable cooling and cost-savings on your heat bill (assuming you have a fan which allows you to reverse the blade direction). Granted, you need to wipe the blades down once in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans get out of equilibrium and require minor adjustments. The most often encountered offenders are loose screws that attach the blades to the motor casing, blades which aren't at precisely the same angle (pitch) as the remaining blades and a blade or blades that weigh slightly more than the others. Be sure that all of the screws are tight, without going into great detail. When they're not tightening the ones that have come loose and run the fan. Your problem continues to be solved in the event the wobbling has ceased.
Otherwise, use a yardstick or another straight bit of wood and put it (together with the fan quit) vertically at the outer edge of one of the blades. Rotate the blades by hand to be certain that the stick touches.