Regency Ceiling Fans Remote Control - Do you know what? The name of the article is just out and out misleading. The only actual "disadvantage" as it pertains to some ceiling fan is what it will take to get one properly installed. Ceiling fans might be hard to install for the inexperienced do it yourselfer. Sometimes, you'll need to run an electrical line to the area where the ceiling fan will be to be installed. Unless you're skillful at doing this kind of thing, hiring a qualified, bonded and licensed electrician will most likely save you a lot of grief in the future.
There is also the minor "minus" that entails the issue of periodic maintenance. Properly installed, a ceiling fan will give you years and years of nice cooling and cost-savings on your heat bill (assuming you have a fan that allows you to reverse the blade direction). Allowed, you should wipe down the blades in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans require slight adjustments and get out of equilibrium. The most frequent offenders are loose screws that attach the blades to the motor housing, blades that are not at the same angle (pitch) as the rest of the blades and also a blade or blades that weigh slightly more than the others. Be certain that all the screws are tight without going into great detail. Whenever they truly aren't tightening the ones that run the fan and have come loose. In the event the wobbling has stopped, your problem has been solved.
If not, use a yardstick or other straight piece of wood and place it (together with the fan stopped) vertically in the outer edge of one of the blades. Rotate the blades by hand to ensure that the stick touches. If one or more don't, only (and gently) bend the blade(s) so that their pitch matches the others and repeat the procedure until you're satisfied that each blade has the same pitch.