Harbor Breeze Ceiling Fan Model Lgg - You know what? The name of this article is simply out-and-out misleading. The sole real "con" in regards to your ceiling fan is what it requires to get one correctly installed. Ceiling fans can be hard to install for the inexperienced do-it-yourselfer. In some cases, where the ceiling fan would be to be installed you'll need to run an electric line to the location. Hiring a competent, bonded and licensed electrician will probably save you much grief in the future unless you are skillful at achieving this kind of thing.
There's also the minor "disadvantage" that involves the problem of periodic maintenance. Correctly installed, a ceiling fan will give you years and years of agreeable cooling and cost-savings on your own heating bill (assuming you've got a fan that enables you to reverse the blade direction). Granted, you should wipe the blades down in a while but everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need slight alterations and get out of equilibrium. The most often encountered culprits are loose screws that attach the blades to the motor housing, blades that aren't at exactly the same angle (pitch) as the remaining blades and also a blade or blades that weigh slightly more than the others. Without going into great detail, be certain that all of the screws are tight. When they aren't tightening the ones that run the fan and have come loose. In the event the wobbling has ceased, your problem has been solved.
Otherwise, utilize a yardstick or other straight bit of wood and place it (with the fan stopped) vertically in the outer edge of among the blades. Rotate the blades by hand to be certain that each blade touches the stick. If one or more don't, simply (and gently) bend the blade(s) so that their pitch matches the others and repeat the procedure until you are satisfied that each blade has the same pitch.