Outdoor Ceiling Fan With Remote - Do you know what? The name of this informative article is simply out-and-out misleading. The only real "disadvantage" in regards to a ceiling fan is what it requires to get one properly installed. Ceiling fans might be difficult to install for the inexperienced do it yourselfer. In some cases, where the ceiling fan will be set up, you will need to run an electrical line to the area. Hiring a capable, bonded and licensed electrician will more than likely save you much grief in the future, unless you are adept at achieving this type of thing.
There is also the minor "con" that involves the issue of periodic care. Correctly installed, a ceiling fan provides many, many years of agreeable cooling and cost-savings on your own heating bill (assuming you have a fan which allows you to reverse the blade direction). Allowed, you have to wipe down the blades in a while but everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans get out of equilibrium and need minor adjustments. The most often encountered culprits are loose screws that attach the blades to the motor casing, blades which aren't at precisely the same angle (pitch) as the remaining blades and also a blade or blades that weigh somewhat more compared to the others. Be sure that every one of the screws are tight without going into great detail. If they truly aren't tightening the ones that run the fan and have come loose. When the wobbling has stopped, your problem continues to be solved.
If not, utilize a yardstick or other straight piece of wood and place it (together with the fan stopped) vertically in the outer edge of one of the blades. Rotate the blades by hand to ensure that each blade touches the stick. Turn the fan on again and see if you've solved the difficulty.