Westinghouse Ceiling Fan Rf Remote Control - Guess what? The title of this informative article is merely out and out misleading. The sole real "disadvantage" as it pertains to some ceiling fan is what it takes to get one correctly installed. Ceiling fans may be hard to install for the inexperienced do it yourselfer. Sometimes, you'll need to run an electrical line to the area where the ceiling fan will be set up. Unless you are skillful at achieving this sort of thing, hiring an authorized, bonded and capable electrician will most likely save you a lot of grief in the long run.
There's also the minor "minus" that entails the issue of regular maintenance. Properly installed, a ceiling fan provides years and years of nice cooling and cost-savings in your heat bill (assuming you have a fan that allows you to reverse the blade direction).
On occasion, ceiling fans get out of equilibrium and need slight adjustments. The most frequent offenders are loose screws that attach the blades to the motor housing, blades which are not at exactly the same angle (pitch) as the rest of the blades and also a blade or blades that weigh slightly more than the others. Without going into great detail, ensure that all of the screws are tight. If they aren't tightening the ones that have come loose and run the fan. Your problem continues to be solved, if the wobbling has ceased.
Otherwise, utilize a yardstick or other straight piece of wood and place it (with the fan stopped) vertically at the outer edge of among the blades. Rotate the blades by hand to make sure that the stick touches.