Sloped Ceiling Fan Adapter - Guess what? The title of this article is simply out and out misleading. The sole actual "con" as it pertains to some ceiling fan is what it takes to get one correctly installed. Ceiling fans could be hard to install for the inexperienced do it yourselfer. In some instances, where the ceiling fan would be to be installed you will need to run an electrical line to the region. Unless you are adept at doing this kind of thing, hiring an authorized, bonded and competent electrician will more than likely save you much grief in the future.
There's also the minor "disadvantage" that entails the issue of periodic maintenance. Properly installed, a ceiling fan will provide years and years of nice cooling and cost-savings on your own heating bill (assuming you have a fan that enables you to reverse the blade direction). Granted, you have to wipe down the blades in a while but then, everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need slight adjustments and get out of balance. The most typical culprits are loose screws that attach the blades to the motor housing, blades that aren't at exactly the same angle (pitch) as the remaining blades and also a blade or blades that weigh somewhat more compared to the others. Make certain that all the screws are tight, without going into great detail. If they aren't tightening the ones that have come loose and run the fan. Your issue was solved if the wobbling has stopped.
Otherwise, use a yardstick or another straight piece of wood and place it (with the fan stopped) vertically at the outer edge of one of the blades. Rotate the blades by hand to be certain that each blade touches the stick.