Ceiling Fan Pull Chain Light Switch Wiring Diagram - Guess what? The title of the informative article is merely out-and-out misleading. The sole real "disadvantage" when it comes to a ceiling fan is what it takes to get one correctly installed. Ceiling fans may be difficult to install for the inexperienced do it yourselfer. In some instances, where the ceiling fan will be to be installed, you'll need to run an electrical line to the location. Unless you are adept at achieving this sort of thing, hiring a competent, bonded and licensed electrician will probably save you a lot of grief in the future.
There is also the minor "con" that entails the issue of regular care. Properly installed, a ceiling fan will provide many, many years of enjoyable cooling and cost-savings on your heating bill (assuming you've got a fan that enables one to reverse the blade direction).
On occasion, ceiling fans get out of balance and need slight adjustments. The most often encountered offenders are loose screws that attach the blades to the motor casing, blades that are not at exactly the same angle (pitch) as the remaining blades and also a blade or blades that weigh slightly more compared to the others. Be certain that all of the screws are tight, without going into great detail. If they aren't tightening the ones that run the fan and have come loose. Your problem continues to be solved, in the event the wobbling has stopped.
Otherwise, make use of a yardstick or other straight part of wood and put it (with the fan stopped) vertically in the outer edge of among the blades. Rotate the blades by hand to ensure that the stick touches. If one or more do not, only (and gently) bend the blade(s) so that their pitch matches the others and repeat the procedure until you are satisfied that each blade has the same pitch.