Universal Thermostatic Ceiling Fan And Light Remote Control - Guess what? The name of this informative article is simply out and out misleading. The only real "con" as it pertains to some ceiling fan is what it requires to get one correctly installed. Ceiling fans might be difficult to install for the inexperienced do it yourselfer. In some instances, where the ceiling fan is to be set up you'll need to run an electrical line to the place. Unless you're skillful at doing this type of thing, hiring a capable, bonded and licensed electrician will more than likely save you a lot of grief in the long term.
There's also the minor "minus" that involves the problem of periodic care. Correctly installed, a ceiling fan will give you many, many years of nice cooling and cost-savings in your heating bill (assuming you've got a fan that allows you to reverse the blade direction). Allowed, you should wipe the blades down in a while but then, everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans get out of equilibrium and need minor adjustments. The most often encountered offenders are loose screws that attach the blades to the motor housing, blades that are not at precisely the same angle (pitch) as the rest of the blades and a blade or blades that weigh somewhat more than the others. Without going into great detail, make certain that all the screws are tight. When they truly aren't tightening the ones that have come loose and run the fan. Your problem has been solved, in the event the wobbling has stopped.
Otherwise, use a yardstick or other straight bit of wood and put it (together with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to make sure that the stick is touched by each blade.
Tags: #universal thermostatic ceiling fan and light remote control #universal thermostatic ceiling fan and light remote control conversion kit #universal thermostatic ceiling fan and light remote control conversion kit manual