High End Decorative Ceiling Fans - Do you know what? The name of the informative article is merely out-and-out misleading. The only real "minus" when it comes to your ceiling fan is what it requires to get one properly installed. Ceiling fans may be difficult to install for the inexperienced do it yourselfer. Sometimes, you'll need to run an electric line to the location where the ceiling fan will be to be set up. Hiring a competent, bonded and licensed electrician will more than likely save you much grief in the long run, unless you are adept at doing this kind of thing.
There is also the minor "minus" that entails the issue of regular care. Correctly installed, a ceiling fan will provide years and years of nice cooling and cost-savings on your heat bill (assuming you've got a fan that enables you to reverse the blade direction).
On occasion, ceiling fans need minor alterations and get out of equilibrium. The most often encountered offenders are loose screws that attach the blades to the motor casing, blades which aren't at exactly the same angle (pitch) as the remaining blades and a blade or blades that weigh slightly more in relation to the others. Without going into great detail, make certain that all of the screws are tight. When they're not tightening the ones that run the fan and have come loose. Your problem continues to be solved when the wobbling has quit.
If not, utilize a yardstick or other straight piece of wood and place it (with the fan quit) vertically in the outer edge of among the blades. Rotate the blades by hand to ensure that every blade touches the stick. If one or more do not, just (and gradually) bend the blade(s) so that their pitch matches the others and repeat the procedure until you are satisfied that each blade has the same pitch. Turn the fan on again and see in the event you have solved the difficulty.