Damp Rated Ceiling Fans With Lights - You know what? The name of this informative article is just out and out misleading. The sole actual "disadvantage" when it comes to your ceiling fan is what it takes to get one correctly installed. Ceiling fans could be hard to install for the inexperienced do it yourselfer. Sometimes, where the ceiling fan will be to be installed you'll need to run an electrical line to the place. Hiring a competent, bonded and licensed electrician will probably save you a lot of grief in the long run unless you're adept at doing this sort of thing.
There is also the minor "con" that entails the problem of periodic maintenance. Correctly installed, a ceiling fan provides years and years of nice cooling and cost-savings in your heating bill (assuming there is a fan that allows you to reverse the blade direction).
On occasion, ceiling fans need minor alterations and get out of balance. The most frequent culprits are loose screws that attach the blades to the motor housing, blades that aren't at precisely the same angle (pitch) as the rest of the blades as well as a blade or blades that weigh slightly more in relation to the others. Make sure that all of the screws are tight without going into great detail. If they aren't tightening the ones that run the fan and have come loose. In the event the wobbling has ceased, your problem has been solved.
Otherwise, use a yardstick or another straight part of wood and put it (with the fan stopped) vertically at the outer edge of among the blades. Rotate the blades by hand to ensure that the stick touches. If one or more don't, merely (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you're satisfied that each blade has the same pitch. Turn the fan on again and see if you've solved the problem.