Hunter Remote Control Ceiling Fan Troubleshooting - Do you know what? The title of this article is simply out and out misleading. The only real "minus" when it comes to a ceiling fan is what it takes to get one correctly installed. Ceiling fans could be hard to install for the inexperienced do-it-yourselfer. In some cases, where the ceiling fan will be to be installed you will need to run an electrical line to the location. Hiring a capable, bonded and licensed electrician will probably save you much grief in the future unless you are skillful at achieving this type of thing.
There is also the minor "disadvantage" that entails the issue of regular maintenance. Correctly installed, a ceiling fan will give you years and years of nice cooling and cost-savings in your heating bill (assuming there is a fan that enables you to reverse the blade direction).
On occasion, ceiling fans get out of balance and need slight adjustments. Without going into great detail, ensure that every one of the screws are tight. When they're not tightening the ones that run the fan and have come loose. Your problem has been solved when the wobbling has quit.
Otherwise, use a yardstick or other straight part of wood and put it (with the fan stopped) vertically at the outer edge of one of the blades. Rotate the blades by hand to be certain that the stick is touched by every blade. If one or more do not, merely (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you are satisfied that each blade has the same pitch. Turn the fan on again and see if you've solved the difficulty.