Beacon Lighting Ceiling Fans - You know what? The title of the article is merely out-and-out misleading. The sole actual "minus" when it comes to your ceiling fan is what it requires to get one properly installed. Ceiling fans could be difficult to install for the inexperienced do it yourselfer. In some instances, you'll need to run an electrical line to the area where the ceiling fan is to be installed. Unless you're adept at doing this kind of thing, hiring an authorized, bonded and competent electrician will probably save you a lot of grief in the future.
There is also the minor "disadvantage" that entails the problem of periodic maintenance. Properly installed, a ceiling fan provides many, many years of pleasant cooling and cost-savings in your heat bill (assuming there is a fan which allows one to reverse the blade direction). Granted, you need to wipe the blades down once in a while but everyone has household cleaning chores to take care of from time to time.
On occasion, ceiling fans need small alterations and get out of equilibrium. Without going into great detail, make sure that every one of the screws are tight. If they're not tightening the ones that run the fan and have come loose. Your problem continues to be solved if the wobbling has stopped.
If not, use a yardstick or another straight piece of wood and place it (with the fan quit) vertically at the outer edge of among the blades. Rotate the blades by hand to ensure that the stick is touched by each blade. If one or more don't, merely (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you're satisfied that each blade has the same pitch. Turn the fan on again and see in the event you've solved the issue.