Oversized Ceiling Fans - Do you know what? The name of this informative article is simply out and out misleading. The sole actual "disadvantage" as it pertains to your ceiling fan is what it takes to get one correctly installed. Ceiling fans can be difficult to install for the inexperienced do-it-yourselfer. In some instances, where the ceiling fan will be to be set up, you will need to run an electric line to the area. Unless you're adept at achieving this sort of thing, hiring a licensed, bonded and capable electrician will more than likely save you a lot of grief in the future.
There is also the minor "con" that entails the problem of periodic maintenance. Correctly installed, a ceiling fan will provide many, many years of pleasant cooling and cost-savings on your own heat bill (assuming there is a fan that allows one to reverse the blade direction).
On occasion, ceiling fans need slight adjustments and get out of equilibrium. The most common offenders are loose screws that attach the blades to the motor housing, blades that are not at exactly the same angle (pitch) as the remaining blades and also a blade or blades that weigh somewhat more compared to the others. Be certain that all of the screws are tight without going into great detail. Whenever they aren't tightening the ones that run the fan and have come loose. Your issue continues to be solved if the wobbling has stopped.
Otherwise, use a yardstick or other straight bit of wood and place it (together with the fan quit) vertically at the outer edge of among the blades. Rotate the blades by hand to be certain that the stick is touched by every blade. If one or more don't, only (and gradually) bend the blade(s) so that their pitch matches the others and repeat the process until you're satisfied that each blade has the same pitch. Turn the fan on again and see if you have solved the difficulty.