Light For Ceiling Fan - Do you know what? The name of the informative article is merely out and out misleading. The sole real "con" as it pertains to your ceiling fan is what it takes to get one properly installed. Ceiling fans might be hard to install for the inexperienced do it yourselfer. Sometimes, where the ceiling fan will be to be installed you'll need to run an electrical line to the location. Hiring a qualified, bonded and licensed electrician will more than likely save you much grief in the long term, unless you are adept at achieving this type of thing.
There is also the minor "disadvantage" that entails the problem of periodic care. Correctly installed, a ceiling fan will provide years and years of pleasant cooling and cost-savings in your heating bill (assuming you've got a fan that enables one to reverse the blade direction). Allowed, you need to wipe down the blades in a while but then, everyone has household cleaning chores to take good care of of from time to time.
On occasion, ceiling fans get out of equilibrium and require slight adjustments. The most typical offenders are loose screws that attach the blades to the motor casing, blades that aren't at precisely the same angle (pitch) as the rest of the blades as well as a blade or blades that weigh slightly more in relation to the others. Make certain that every one of the screws are tight without going into great detail. When they truly aren't tightening the ones that have come loose and run the fan. Your problem has been solved in the event the wobbling has ceased.
If not, make use of a yardstick or another straight part of wood and place it (with the fan quit) vertically in the outer edge of one of the blades. Rotate the blades by hand to be certain that each blade touches the stick. If one or more don't, just (and gradually) bend the blade(s) so that their pitch matches the others and repeat the process until you are satisfied that each blade has the same pitch.